Al-Mg-Mn Alloy Plate Classification:
Non-Paint Products: hammer aluminum, embossed aluminum, pre-passivated aluminum surface panels.
Paint Products: spray coat, coil coat
By coating types divided into:
Coating type: Polyester,Polyurethane,Polyamide,Modified Silicone,Epoxy,PVDF
Material Properties:
1.Weight:Aluminum density 2.73 g/m3,only the steel of 1/3 strength.
2.Intensity: Through melting and heat treatment method can achieve very high strength,even the construction of large aircraft structures.
3.Corrosion Resistance:Outdoor aluminum is durable and reliable construction materials,it has a self-rust function of the surface in the natural environment can form a thin layer of dense oxide layer,to prevent continue in the air oxidation of metal corrosion,but also has a variety of acid corrosion resistance ability.
4.Surface finish and elegant appearance:Can be anodized, electrophoresis,chemical processing,polishing,paint handling.
5.Plasticity is good ,and easy to process.
6.Good conductivity:Non-magnetization and low electric spark sensitivity,can avoid electromagnetic interference and reduce the flammability under special circumstances.
7.Links convenience:Aluminum can be riveting,welding,adhesives and other means to connect.
8.Recyclable:High value of aluminum recycling,the cost of long-term use of more economical,in the conservation of natural resources has played a positive role.100% could be recycled.
Diverse Surface application.
It can be divided into Paint and Non-Paint application. For surface painting, there are two types: fluorocarbon(PVDF) & polyester(PE); for Non-Paint surface, there are" bare board" & "Hammer aluminum plate".
Normally,customer chose the PVDF as it has great corrosion resistant ability to keep long life of the Al-Mg-Mn roof.
Product specifications:
| Item |
Al-Mg-Mn alloy 3003, 3004,TD 25-430 |
| Steel: 0.5 mm---0.7 mm |
|
| Aluminium: 0.5 mm---1.2 mm |
|
| Aluzinc: 0.5 mm---0.7 mm |
|
| Stainless steel: 0.45 mm---0.9 mm |
|
| Material |
Copper: 0.6 mm---1.0 mm |
| Zinc-Ti: 0,7 mm---1,0 mm |
|
| Espesor del metal base |
0,75 mm, 0,8 mm, 0,9 mm, 1,0 mm y 1,2 mm |
| Ancho de construcción |
400 mm y 430 mm |
| Longitud del perfil |
11,8 m (40 GP/HQ), 5,8 m (20 GP), personalizado en el sitio |
| Altura del perfil |
25 mm; 65 mm |
| Acabados superficiales |
PE, PVDF, Estuco gofrado y AluPlusZinc |
| Color |
Colores estándar RAL o personalizados |
Techo curvo de metal con junta alzada
Aplicación del producto:
El sistema de techado de láminas de metal de aleación Al Mg Mn ha sido ampliamente utilizado y completamente probado, lo cual es la opción ideal para diferentes tipos de viviendas, edificios comerciales y edificios públicos. ser totalmente resolver este problema.
